Course Overview
The ADAS Calibration course is part of a comprehensive training program designed to equip automotive and collision technicians with the knowledge and skills necessary to accurately diagnose, repair and calibrate Advanced Driver Assistance Systems (ADAS). This hands-on course provides detailed on-vehicle activities using the latest industry specific diagnostic and calibration equipment. ADAS technology promotes the principles of the green economy and clean transportation by improving fuel efficiency, reducing emissions, preventing accidents, optimizing traffic flow, supporting electric vehicles, reducing accidents & the number of vehicles entering scrap yards and facilitating infrastructure planning. As these systems continue to advance, they will play an increasingly vital role in achieving a greener and more sustainable transportation ecosystem.
Prerequisite(s)
- Automotive service, collision technician or level-3 equivalent apprentice
Credits
1.5
Domestic fees
$642.97 - $679.83 See individual course offerings below for actual costs.
International fees are typically 3.4 times the domestic tuition. Exact cost will be calculated upon completion of registration.
Learning Outcomes
Upon successful completion of this course, the student will be able to:
- Understand the significance of ADAS technologies in vehicle safety
- Gain practical knowledge of ADAS sensor calibration techniques for camera, radar, and LiDAR systems.
- Use ADAS related tools and techniques to repair and calibrate systems.
- Discuss emerging trends and advancements in ADAS and clean technology integration.
Effective as of Winter 2024
Course Offerings
Spring/Summer 2026
Below are two offerings of AUTO 1020 for the Spring/Summer 2026 term.
CRN 69503
Dates
Jun 16 - Jun 18 Loading
- CRN 69503
- $679.83 Domestic fees
Class meeting times
| Dates | Days | Times | Locations |
|---|---|---|---|
| Jun 16 - Jun 18 | Tue, Wed, Thu | 07:30 - 14:00 | Burnaby NE10 Rm. 123 |
Duration
3 days
Instructor
TBD
Course outline
Course outline TBD — see Learning Outcomes in the interim.
Important information
- Important course information will be sent to you prior to your course start date. Check your myBCIT email account to access this information.
- CSA approved safety glasses and steel-toed footwear required.
Confirmation
Required
To proceed with registration and add this course to the cart, please confirm:
Status
If you have any questions about this course, please contact us.
CRN 70132
Dates
Aug 25 - Aug 27 Loading
- CRN 70132
- $679.83 Domestic fees
Class meeting times
| Dates | Days | Times | Locations |
|---|---|---|---|
| Aug 25 - Aug 27 | Tue, Wed, Thu | 07:30 - 14:00 | Burnaby NE10 Rm. 123 |
Duration
3 days
Instructor
TBD
Course outline
Course outline TBD — see Learning Outcomes in the interim.
Important information
- Important course information will be sent to you prior to your course start date. Check your myBCIT email account to access this information.
- CSA approved safety glasses and steel-toed footwear required.
Confirmation
Required
To proceed with registration and add this course to the cart, please confirm:
Status
If you have any questions about this course, please contact us.
Fall 2026
Below are two offerings of AUTO 1020 for the Fall 2026 term.
CRN 51520
Dates
Oct 16 - Oct 18 Loading
- CRN 51520
- $642.97 Domestic fees
Class meeting times
Duration
3 days
Instructor
TBD
Course outline
Course outline TBD — see Learning Outcomes in the interim.
Important information
- Important course information will be sent to you prior to your course start date. Check your myBCIT email account to access this information.
- CSA approved safety glasses and steel-toed footwear required.
Confirmation
Required
To proceed with registration and add this course to the cart, please confirm:
Status
If you have any questions about this course, please contact us.
CRN 51519
Dates
Oct 27 - Oct 29 Loading
- CRN 51519
- $642.97 Domestic fees
Class meeting times
| Dates | Days | Times | Locations |
|---|---|---|---|
| Oct 27 - Oct 29 | Tue, Wed, Thu | 07:30 - 14:00 | Burnaby NE10 |
Duration
3 days
Instructor
TBD
Course outline
Course outline TBD — see Learning Outcomes in the interim.
Important information
- Important course information will be sent to you prior to your course start date. Check your myBCIT email account to access this information.
- CSA approved safety glasses and steel-toed footwear required.
Confirmation
Required
To proceed with registration and add this course to the cart, please confirm:
Status
If you have any questions about this course, please contact us.
Programs and courses are subject to change without notice. Find out more about BCIT course cancellations.