To support you and your education, BCIT is adapting applied learning in formats appropriate to the unfolding global situation. Spring and Summer PTS classes are being delivered in an online format unless you are notified otherwise.
Covers the various components of a bridge structure including timber trusses, concrete, reinforcing steel, deckjoints, bridge rails, etc.
This is a special section set up for MOT employees only. Prior to registering, please contact department for approval at 604-431-4969. To register by phone, please call Student Information & Enrolment Services at 1-866-434-1610 or 604-434-1610. Please note that the above price is for tuition only; textbooks and materials are additional. Course materials and textbooks are not shipped automatically, you must order them from the BCIT Bookstore: www.bcitbookstore.ca/distance
Important course information will be sent to you immediately after registering.
Check your myBCIT email account to access this
Upon successful completion, the student will be able to:
Module 7 - Piling
State the reasons for using piles.
State the two main reactions between soils and piling.
State the methods of handling various types of piling.
Describe the steps taken to prepare piling for driving.
State the signs of pile distress during driving.
Describe the common types of pile driving equipment.
State the necessity for the construction of templates.
Describe the procedure for proper lead alignment.
Describe determination of absolute refusal.
Describe the procedure for capping timber piles.
Module 8 - Log Cribs and Log Stringer Bridges
Describe the uses for log cribs and log stringer bridges.
Describe how to construct a log crib abutment.
Define the terms used in the construction of log stringer bridges.
Describe how to build a log stringer bridge.
Module 9 - Timber Construction of Piers, Bents and Trestles
Describe the difference between a timber pier and a timber bent.
List the purposes of timber piers and bents.
State the pile driving procedures relative to timber pier and bent construction.
State the pile cut-off procedures.
State the framing procedures for timber pier and bent construction.
List specific repair procedures for pier components.
List the framing procedures for the construction of timber trestles.
Describe the layout and installation of timber stringers.
Describe the stringer fastening procedures.
Describe decking procedures.
Module 10 - Timber Trusses
List and describe the components on a timber truss.
State the function of each component.
Describe the techniques for replacing the various components.
Describe how temporary props can be used to support a truss during repair.
Module 11 - Concrete
State the basic requirements of aggregate production.
List five common types of cement and describe their uses.
List common admixtures and describe their uses.
Describe types of equipment used for batching and mixing concrete.
Describe common placing techniques.
Describe the advantages and disadvantages of various placing methods.
Describe the necessity for consolidation and the proper method of vibration.
Describe what is meant by curing and how it is achieved.
Module 12 - Reinforcing Steel
State the purpose of steel reinforcement.
State the function of stirrups and temperature steel.
Describe the physical properties and dimensions of reinforcing steel.
Describe proper handling and storage techniques.
State the purpose of tying and describe the basic tying systems.
Describe the benefits of assembling reinforcing steel in place.
Describe the benefits of pre-assembly.
Describe the procedure for a pre-pour inspection.
Describe the use and handling requirements of epoxy coated reinforcing steel.
Module 13 - Formwork for Concrete
List the contributing factors affecting hydrostatic pressure and describe the effect each has on the lateral pressure exerted on the formwork by the concrete.
List and describe other loads that must be considered in the design of formwork.
Discuss the applications of the various formwork materials.
List and describe the components of wall forms, column forms, beam forms and deck forms.
Discuss the advantages of prefabricating formwork.
Describe the use of form release agents.
Describe how to locate forms accurately before and during concrete pours.
List potential causes of form failure.
Module 14 - Deck Joints
State the purposes of deck joints.
List the components of fixed joints.
List the components of various types of expansion joints.
Describe the method of deck joint installation.
State the inspection and maintenance requirements of deck joints.
Module 15 - Bridge Rails
Describe the components of timber rails.
Describe the components of concrete and/or steel railings.
Describe the repair methods used for both steel and concrete anchorages, posts and rails.
Describe the components of aluminum rail systems.
Module 16 - Bailey/Acrow Bridges
Describe each component and its use in a Bailey Bridge.
Describe the more common Bailey combinations.
Describe the layout of the launching rollers.
Describe the purpose of the launching nose and how it is assembled.
Describe the jacking down procedures.
Describe the decking techniques.
Describe how to inspect a Bailey Bridge.
Describe the procedure for removing a Bailey Bridge.
Describe how to inspect individual components during disassembly.
Describe how components should be stored.
Describe the main differences between Bailey and Acrow panel bridges.
Effective as of Fall 2003
If you have a comment or question about this course, please complete and submit the form below.
Interested in being notified about future offerings of TSYH 2574 - Bridge Inspection Part 2?
If so, fill out the information below and we'll notify you by email when courses for each new term are displayed here.